In-line tlačni regulator, IT/ET, G 1/4, prednastavljen na 6 bar slika
In-line tlačni regulator, IT/ET, G 1/4, prednastavljen na 6 bar slika

* slike so simbolične

In-line tlačni regulator, IT/ET, G 1/4, prednastavljen na 6 bar

SKU: 101492RIE
EAN: 4047322247283

Inline pressure regulator, IT/ET, with secondary venting, Pre-pressure dependent, G 1/4, Working pressure (pre-set) 6 bar

The majority of pneumatic tools are connected directly to the compressed air supply by means of a quick disconnect coupling, in other words they tend to be supplied with a higher pressure than is actually required. Which increases consumption and leads to tool overload.

Added safety is provided by the automatic self-relieving function. If the tool is disconnected from the hose, it continues to work for a short period, even though it has been switched off, owing to the residual pressure that is present on the tool side. Inadvertent operation of the tool can thus lead to serious injuries to the user (tackers or nail drivers can fire up to another ten shots).

This effect can be prevented by using the inline pressure regulators, which have a preset pressure determined by the application, thereby achieving energy efficiency and economy.

Čas dobave: Predvidoma 3 - 5 dni
62,60 €
ali od 11,53 € / mesec
Izračunaj obrok
leanpay logo
Obrestno financiranje
  • 11,53 € x 6 mesecev
  • 22,81 € x 3 mesecev

Leanpay omogoča enostavne obročne nakupe preko spleta. Za obročno plačilo v košarici izberi Leanpay. Informativni izračun ne vključuje stroškov ocene tveganja.

Primerjaj z ostalimi
Šifra Delovni tlak (prednastavitev) [bar] Pretok [l/min] Zaloga Cena Nakup Natisni
101491RIE 5 650
Čas dobave: Predvidoma 3 - 5 dni
62,60 € Natisni
101493RIE 8 800
Čas dobave: Predvidoma 3 - 5 dni
62,60 € Natisni
101488RIE 2 500
Čas dobave: Predvidoma 3 - 5 dni
62,60 € Natisni
101490RIE 4 600
Čas dobave: Predvidoma 3 - 5 dni
62,60 € Natisni
101489RIE 3 550
Čas dobave: Predvidoma 3 - 5 dni
62,60 € Natisni
149054RIE 7 750
Čas dobave: Predvidoma 3 - 5 dni
62,60 € Natisni
101492RIE 6 700
Čas dobave: Predvidoma 3 - 5 dni
62,60 € Natisni

Opis

Inline pressure regulator, IT/ET, with secondary venting, Pre-pressure dependent, G 1/4, Working pressure (pre-set) 6 bar

The majority of pneumatic tools are connected directly to the compressed air supply by means of a quick disconnect coupling, in other words they tend to be supplied with a higher pressure than is actually required. Which increases consumption and leads to tool overload.

Added safety is provided by the automatic self-relieving function. If the tool is disconnected from the hose, it continues to work for a short period, even though it has been switched off, owing to the residual pressure that is present on the tool side. Inadvertent operation of the tool can thus lead to serious injuries to the user (tackers or nail drivers can fire up to another ten shots).

This effect can be prevented by using the inline pressure regulators, which have a preset pressure determined by the application, thereby achieving energy efficiency and economy.

Tehnični podatki in specifikacije

Navoj G 1/4
Max. obratovalni tlak [bar] 25
Max. temperaturno območje [°C] 80
Ohišje Aluminium
Pretok [l/min] 700
Delovni tlak (prednastavitev) [bar] 6
Notranji deli Stainless steel, nitrile rubber, brass
A [mm] 69.0
Serija inline
a/f 1 [mm] 16
a/f 2 [mm] 19