Double piston pressure multiplier (booster) with controller, G3/8 slika
Double piston pressure multiplier (booster) with controller, G3/8 slika

* slike so simbolične

Double piston pressure multiplier (booster) with controller, G3/8

SKU: 101532RIE
EAN: 4047322284943

Double piston pressure multiplier (booster) with controller, G3/8, PistonØ63mm,Reinforced 1:1 up to 1.6:1, Input pressure 2-10 bar

The booster increases the existing supply pressure for one or more actuators in a fixed transmission ratio (see technical data) and thus provides the required working pressure.

The booster is not suitable for applications that have a longer lasting air consumption - such as pneumatic grinders, air motors, vacuum generation via Venturi nozzles, etc.

The design uses two coupled oscillating differential pistons and integrated check valves. To avoid fluctuations in output pressure, the use of a tank for pressure build-up and storage of compressed air is recommended.

Operation with filtered and unlubricated or lubricated compressed air possible (once lubricated, continuous lubrication is necessary).

Čas dobave 3 - 5 dni
785,48 €
ali od 20,90 € / mesec
Izračunaj obrok
leanpay logo
Obrestno financiranje
  • 20,90 € x 48 mesecev
  • 26,71 € x 36 mesecev
  • 38,37 € x 24 mesecev
  • 73,45 € x 12 mesecev
  • 143,69 € x 6 mesecev
  • 284,19 € x 3 mesecev

Leanpay omogoča enostavne obročne nakupe preko spleta. Za obročno plačilo v košarici izberi Leanpay. Informativni izračun ne vključuje stroškov ocene tveganja.

Primerjaj z ostalimi
Šifra Navoj Max. temperaturno območje [°C] Bat Ø [mm] H [mm] L [mm] Zaloga Cena Nakup Natisni
101532RIE G 3/8 60 63 183.0 290.0
Čas dobave 3 - 5 dni
785,48 € Natisni
101531RIE G 1/8 50 40 141.2 194.0
Čas dobave 3 - 5 dni
485,29 € Natisni

Opis

Double piston pressure multiplier (booster) with controller, G3/8, PistonØ63mm,Reinforced 1:1 up to 1.6:1, Input pressure 2-10 bar

The booster increases the existing supply pressure for one or more actuators in a fixed transmission ratio (see technical data) and thus provides the required working pressure.

The booster is not suitable for applications that have a longer lasting air consumption - such as pneumatic grinders, air motors, vacuum generation via Venturi nozzles, etc.

The design uses two coupled oscillating differential pistons and integrated check valves. To avoid fluctuations in output pressure, the use of a tank for pressure build-up and storage of compressed air is recommended.

Operation with filtered and unlubricated or lubricated compressed air possible (once lubricated, continuous lubrication is necessary).

Tehnični podatki in specifikacije

Navoj G 3/8
Max. vhodni tlak [bar] 10
Bat Ø [mm] 63
Max. izhodni tlak [bar] 16
Min. vhodni tlak [bar] 2
Ohišje Anodised aluminium
Tesnilo NBR
Ovoj Anodised aluminium jacket
Možnosti montaže Any position, with 4 mounting holes
P2:P1 1:1 to 1,6:1
Min. temperaturno območje [°C] -10
Max. temperaturno območje [°C] 60
L [mm] 290.0
H [mm] 183.0
Regulator tlaka with plastic body